WrapConfigurator

Wrap calculator

How much vinyl do you need to wrap your car?

A Tesla Model 3 needs about 295 sq ft of vinyl, roughly 59 ft of a 60-inch roll. Order 66 ft (22 yd, 20.5 m) to cover the ±10% margin. Pick your own car below.

Film
Job
Type

Gloss, satin, matte

2024 Tesla Model 3 · full car

Order

66 ft of 60″ roll

20.5 m of 1.52 m roll · 22 yd

Fits on one standard 75 ft (25 yd) roll.

Film area

295 sq ft

265–325 sq ft

 

27.6 m²

24.8–30.3 m²

  1. Car size: 4,720 × 1,850 × 1,441 mm (186 × 73 × 57 in), length × width × height.
  2. Film area: 295 sq ft, about 59 ft of 60″ roll, with install waste included.
  3. Range ±10%: 265–325 sq ft.
  4. Order the top of the range, rounded up to whole feet of 5 ft wide roll: 66 ft.
See the color on your car

Free, no signup. Every finish we carry, on your car.

How the calculator works

  1. Start from the car's size. Overall length, width (without mirrors) and height from the maker's published specs.
  2. Turn the size into film. The sides, top and ends of that box are each scaled by how much of them is paint rather than glass, wheel arches or grille. Then 12% goes on for bleed, handling and overlap between panels. A body-type factor corrects for shape: a pickup's open bed is not film. The factors are calibrated against published per-car figures from template makers, film suppliers and installers.
  3. Adjust for the job. Special films (metallic, pearl, color-shift, brushed, carbon) add 10%, because pieces can't be turned to nest on the roll. Chrome adds 30%. Door jambs add 15%. A hood is one piece about 5 ft deep across the car's width.
  4. Give a range, order the top. The figure is shown as ±10%, which covers the biggest miss we found against published figures (7–8%). The order is the top of that range on a 60-inch (5 ft, 1.52 m) roll, so all the film can come from one batch.
  5. First wrap? Add 15 ft of spare film for re-dos.

Film area here is gross film: the rectangles you cut from the roll, waste included. That is the figure suppliers quote. The painted surface itself is about a third smaller.

Vinyl needed by car size

Full wrap in standard film (gloss, satin, matte), from the 310 cars in our catalog. Order = feet of 60-inch roll, top of the ±10% range.

Car sizeTypical carFilm areaOrderRolls (75 ft)
Small car / hatchback Volkswagen Golf 8 R 255–290 sq ft 56–64 ft (typ. 61) 1
Compact sedan Subaru WRX STI 280–295 sq ft 62–66 ft (typ. 65) 1
Mid-size sedan Mercedes-Benz C63s AMG E Performance 290–325 sq ft 64–72 ft (typ. 69) 1
Large sedan BMW 750Li 320–355 sq ft 70–79 ft (typ. 74) 1–2
Wagon / estate Porsche Taycan Turbo S Cross Turismo 295–340 sq ft 65–75 ft (typ. 70) 1
Coupe / convertible BMW M4 (F82) 230–360 sq ft 51–79 ft (typ. 61) 1–2
Supercar Chevrolet Corvette Z51 240–290 sq ft 53–64 ft (typ. 57) 1
Small SUV / crossover Audi Q3 270–390 sq ft 60–86 ft (typ. 70) 1–2
Mid-size SUV Xiaomi YU7 335–410 sq ft 74–91 ft (typ. 79) 1–2
Large SUV BMW X7 M60i 370–445 sq ft 82–98 ft (typ. 90) 2
Mid-size pickup Rivian R1T 275–355 sq ft 62–78 ft (typ. 71) 1–2
Full-size pickup Ford F-150 Tremor 325–405 sq ft 72–90 ft (typ. 80) 1–2

Every car, full wrap

Order length in feet of 60-inch roll, standard film. Each car links to its wrap cost page, which shows the same number.

Show all 310 cars

Audi

Avatr

Bentley

BMW

BYD

Cadillac

Chevrolet

Denza

Dodge

Ferrari

Ford

GMC

Honda

Hyundai

Infiniti

Jaecoo

Jeep

Kia

Lamborghini

Land Rover

Lexus

Lixiang

Lotus

Mazda

McLaren

Mercedes-Benz

Nissan

Porsche

Ram

Rivian

Rolls-Royce

Subaru

Tesla

Toyota

Volkswagen

Xiaomi

Yangwang

Zeekr

Vinyl questions, answered

How much vinyl do I need to wrap a car?

For a full wrap in gloss, satin or matte: about 61 ft of 60-inch roll for a small hatchback, 69 ft for a mid-size sedan and 90 ft for a large SUV. Those are order lengths, the top of a ±10% range. Across our 310 cars the order runs from 51 to 98 ft.

How many rolls of vinyl does a car take?

A standard roll is 60 inches wide and 75 ft (25 yd) long. Most cars fit on one roll. Every large SUV in our catalog needs two. Any car whose order goes over 75 ft needs a second roll; the table above shows which sizes get there.

Why order more than the estimate?

All the film on one car should come from the same production batch, because color can shift slightly between batches. Running short halfway through is the expensive mistake, so the calculator orders the top of the ±10% range.

Do chrome and color-shift films need more vinyl?

Yes. Metallic, pearl, color-shift, brushed and carbon films have a direction, so pieces can't be rotated to fit the roll: add about 10%. Chrome wastes 30% or more. On a mid-size sedan that takes the order from 69 ft to 89 ft in chrome.

How much vinyl for a hood, roof or mirrors?

A hood is cut as one piece about 5 ft deep and as long as the car is wide: about 31 sq ft on a mid-size sedan, 7 ft of roll. A pair of mirror caps takes a piece about 2 × 5 ft (10 sq ft), more on trucks and vans. We don't give a roof figure: roof length varies too much between cars to estimate from overall size.

Do door jambs need extra film?

Yes, about 15% more on a four-door car, roughly 5 to 8 sq ft per opening.

I've never wrapped a car. How much spare should I buy?

Add about 15 ft for mistakes and re-dos. Tick "My first wrap" and the calculator adds it.

How accurate is this?

It is a planning estimate, usually within 10% of published per-car guides. Installers cut differently, so check with yours before you buy film.

Keep exploring

Wrap cost by car Car wrap visualizer Car color changer Browse finishes Find an installer